Deployment Guide

Version Description
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
ip msdp mesh-group
To be a member of a mesh group, congure a peer.
Syntax
ip msdp mesh-group {name} {peer address}
To remove the peer from a mesh group, use the no ip msdp mesh-group {name} {peer address}
command.
Parameters
name Enter a string of up to 16 characters long for as the mesh group name.
peer address Enter the peer address in a dotted decimal format (A.B.C.D.).
Defaults Not congured.
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information An MSDP mesh group is a mechanism for reducing SA ooding, typically in an intra-domain setting. When some
subset of a domain’s MSDP speakers are fully meshed, they can be congured into a mesh-group. If member X of
a mesh-group receives a SA message from an MSDP peer that is also a member of the mesh-group, member X
accepts the SA message and forwards it to all of its peers that are not part of the mesh-group. However, member
X cannot forward the SA message to other members of the mesh-group.
ip msdp originator-id
Congure the MSDP Originator ID.
Syntax
ip msdp originator-id {interface}
To remove the originator-id, use the no ip msdp originator-id {interface} command.
Parameters
interface Enter the following keywords and slot/port or number information:
• For a Loopback interface, enter the keyword loopback then a number from 0 to
16383.
• For a Port Channel interface, enter the keywords port-channel then a number.
The range is from 1 to 128.
•
For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
• For a VLAN, enter the keyword vlan then a number from 1 to 4094.
Multicast Source Discovery Protocol (MSDP) 859