Deployment Guide

Version Description
9.3(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
9.2(0.0) Introduced on the MXL Switch .
Related Commands show ip msdp sa-cache rejected-sa — Displays the rejected SAs in the SA cache.
ip msdp default-peer
Dene a default peer from which to accept all source-active (SA) messages.
Syntax
ip msdp default-peer peer address [list name]
To remove the default peer, use the no ip msdp default-peer {peer address} list name
command.
Parameters
peer address Enter the peer address in a dotted decimal format (A.B.C.D.)
list name Enter the keywords list name and specify a standard access list that contains the RP
address that should be treated as the default peer. If no access list is specied, then all
SAs from the peer are accepted.
Defaults Not congured.
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information If a list is not specied, all SA messages received from the default peer are accepted. You can enter multiple
default peer commands.
ip msdp log-adjacency-changes
Enable logging of MSDP adjacency changes.
Syntax
ip msdp log-adjacency-changes
To disable logging, use the no ip msdp log-adjacency-changes command.
Defaults Not congured.
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
858 Multicast Source Discovery Protocol (MSDP)