Deployment Guide

advertise interface-port-desc
Advertise port descriptor.
Syntax
advertise interface-port-desc {description | port-id}
To remove the advertised port descriptor, use the no advertise interface—port—desc {description
| port-id} command.
Parameters
description Enter the keyword description then the interface description.
port-id Enter the keyword port-id then the port-id. The range is from 0 to 7.
Defaults None
Command Modes
CONFIGURATION (conf-lldp)
INTERFACE (conf-if-interface-lldp)
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.11(2.0P1) Introduced the description and port-id options.
Usage Information
If you do not specify the option, by default the port-id takes higher precedence and sends the port-id in the LLDP
packets.
advertise management-tlv
Advertise management TLVs (Type, Length, Value).
Syntax
advertise management-tlv {system-capabilities | system-description | system-
name}
To remove advertised management TLVs, use the no advertise management-tlv {system-
capabilities | system-description | system-name} command.
Parameters
system-capabilities Enter the keywords system-capabilities to advertise the system capabilities TLVs
to the LLDP peer.
system-description Enter the keywords system-description to advertise the system description TLVs
to the LLDP peer.
system-name Enter the keywords system-name to advertise the system name TLVs to the LLDP
peer.
Defaults none
Command Modes CONFIGURATION (conf-lldp)
836 Link Layer Discovery Protocol (LLDP)