Deployment Guide
Command Modes EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
9.2(0.0) Introduced on the M I/O Aggregator.
Related Commands show system— Displays the current status of all stack members or a specic member.
banner exec
Congure a message that is displayed when your enter EXEC mode.
Syntax
banner exec c line c
Parameters
c Enter the keywords banner exec, then enter a character delineator, represented here
by the letter c. Press ENTER.
line Enter a text string for your banner message ending the message with your delineator. In
the following example, the delineator is a percent character (%); the banner message is
“testing, testing”.
Defaults No banner is displayed.
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information Optionally, use the banner exec command to create a text string that displays when you accesses EXEC mode.
The exec-banner command toggles that display.
Example
Dell(conf)#banner exec ?
LINE c banner-text(max length 255) c, where 'c' is a delimiting
character
Dell(conf)#banner exec %
Enter TEXT message. End with the character '%'.
This is the banner%
Dell(conf)#end
Dell#exit
4d21h5m: %STKUNIT0-M P:CP %SEC-5-LOGOUT: Exec session is terminated for user on
line console
This is the banner
Dell Force10 con0 now available
Press RETURN to get started.
82 Control and Monitoring