Deployment Guide

distribute-list in
Filter network prexes received in updates.
Syntax
distribute-list prefix-list-name in [interface]
To return to the default values, use the no distribute-list prefix-list-name in [interface]
command.
Parameters
prex-list-name Specify the prex list to lter prexes in routing updates.
interface (OPTIONAL) Identies the interface type slot/port as one of the following:
• For a Port Channel interface, enter the keywords port-channel then a number.
The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
•
For a VLAN, enter the keyword vlan then a number from 1 to 4094.
Defaults Not congured.
Command Modes
• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands
• distribute-list out — suppresses networks from being advertised in updates.
• redistribute — redistributes routes from one routing domain to another routing domain.
distribute-list out
Suppress network prexes from being advertised in outbound updates.
Syntax
distribute-list prefix-list-name out [connected | bgp as number | ospf process-
id | rip | static]
To return to the default values, use the no distribute-list prefix-list-name out [bgp as
number connected | ospf process-id | rip | static] command.
Parameters
prex-list-name Specify the prex list to lter prexes in routing updates.
connected (OPTIONAL) Enter the keyword connected for directly connected routing process.
ospf process-id (OPTIONAL) Enter the keyword ospf then the OSPF process-ID number. The range is
from 1 to 65535.
766 Intermediate System to Intermediate System (IS-IS)