Deployment Guide

Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
If you do not congure the default-metric command, in addition to the redistribute command, or there
is no route map to set the metric, the metric for redistributed static and connected is “0”.
To redistribute the default route (0::0/0), congure the neighbor default-originate command.
Related Commands neighbor default-originate — injects the default route.
redistribute isis
Redistribute IS-IS routes into BGP.
Syntax
redistribute isis [level-1 | level-1-2 | level-2] [metric metric-value |
metric-type {external | internal}] [route-map map-name]
To stop redistribution of IS-IS routes, use the no redistribute isis command.
Parameters
level-1 | level-1-2 |
level-2]
(OPTIONAL) Enter the type (level) of routes to redistribute.
metric (OPTIONAL) Assign metric to an interface for use with IPv6 information.
metric-type (OPTIONAL) The external link type associated with the default route advertised into a
routing domain. You must specify one of the following:
• external
• internal (default)
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of an established route
map.
If the route map is not congured, the default is deny (to drop all routes).
Defaults Not congured.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
708 IPv6 Border Gateway Protocol (IPv6 BGP)