Deployment Guide

Example
copy http://admin:admin123@10.16.206.77/sample_file flash://sample_file
Related Commands
copy ftp:flash
Copy les from FTP server to switch
logging coredump stack-unit
Enable the coredump.
Syntax
logging coredump stack-unit all
Command Modes CONFIGURATION
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information The Kernel core dump can be large and may take up to ve to 30 minutes to upload. The Dell Networking OS does
not overwrite application core dumps so delete them as necessary to conserve space on the ash; if the ash is
out of memory, the coredump is aborted. The Dell Networking OS completes the coredump process and waits until
the upload is complete before rebooting the system.
logging coredump server
Designate a server to upload core dumps.
Syntax
logging coredump server {ipv4-address} username name password [type] password
Parameters
{ipv4-address } Enter the server IPv4 address (A.B.C.D).
name Enter a username to access the target server.
type Enter the password type:
Enter 0 to enter an unencrypted password.
Enter 7 to enter a password that has already been encrypted using a Type 7 hashing
algorithm.
password Enter a password to access the target server.
Defaults Crash kernel les are uploaded to ash by default.
Command Modes CONFIGURATION
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.4.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
68 File Management