Deployment Guide

Parameters
as-number Enter the AS number. The range is 1 to 65535.
...as-number (OPTIONAL) Enter up to 16 confederation numbers. The range is from 1 to 65535.
Defaults Not congured.
Command Modes ROUTER BGP
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
The Autonomous Systems congured in this command are visible to the EBGP neighbors. Each Autonomous
System is fully meshed and contains a few connections to other Autonomous Systems.
After specifying autonomous systems numbers for the BGP confederation, recycle the peers to update their
conguration.
Related Commands bgp confederation identiercongures a confederation ID.
bgp dampening
Enable BGP route dampening and congure the dampening parameters.
Syntax
bgp dampening [half-life reuse suppress max-suppress-time] [route-map map-name]
Parameters
half-life (OPTIONAL) Enter the number of minutes after which the Penalty is decreased. After the
router assigns a Penalty of 1024 to a route, the Penalty is decreased by half, after the half-
life period expires. The range is from 1 to 45. The default is 15 minutes.
reuse (OPTIONAL) Enter a number as the reuse value, which is compared to the apping
route’s Penalty value. If the Penalty value is less than the reuse value, the apping route is
once again advertised (or no longer suppressed). The range is from 1 to 20000. The
default is 750.
suppress (OPTIONAL) Enter a number as the suppress value, which is compared to the apping
route’s Penalty value. If the Penalty value is greater than the suppress value, the apping
route is no longer advertised (that is, it is suppressed). The range is from 1 to 20000. The
default is 2000.
max-suppress-time (OPTIONAL) Enter the maximum number of minutes a route can be suppressed. The
default is four times the half-life value. The range is from 1 to 255. The default is 60
minutes.
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of a congured route map.
Only match commands in the congured route map are supported.
Defaults Disabled.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Supported Modes Full–Switch
670 IPv6 Border Gateway Protocol (IPv6 BGP)