Deployment Guide
Version Description
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
NOTE: If a route has a mask greater than 64, no output is displayed and no output is displayed for show
ipv6 cam stack-unit unit-number port-set {0-1} ipv6-address, but an
equivalent /64 entry would be listed in the
show ipv6 cam stack-unit unit-number port-
set {0-0} output. Similarly, if there is more than one ECMP object with a destination route that has a
mask greater than 64, if the rst 64 bits in the destination routes of the ECMP objects are the same,
only one route is installed in CAM even though multiple ECMP path entries exist.
show ipv6 control-plane icmp
Displays the status of the icmp control-plane setting for the error eate limit setting.
Syntax
show ipv6 control-plane icmp
Default 100
Command Modes EXEC
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands ipv6 owlabel-zero — Congure IPv6 address auto-conguration for the management interface.
show ipv6 b stack-unit
View all FIB entries.
Syntax
show ipv6 fib stack-unit unit-number [summary | ipv6-address]
Parameters
slot-number Enter the number of the stack unit. The range is from 0 to 5.
summary (OPTIONAL) Enter the keyword summary to view a summary of entries in IPv6 cam.
ipv6-address Enter the IPv6 address in the x:x:x:x::x/n format to display networks that have more
specic prexes. The range is from /0 to /128.
NOTE: The :: notation species successive hexadecimal elds of zeros.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
656 IPv6 Basics