Deployment Guide

transform-set
Specify the transform set the crypto policy uses.
Syntax
transform-set transform-set-name
To delete a transform set from the crypto policy, use the no transform-set transform-set-name
command.
Parameters
transform-set-
name
Enter the name for the crypto policy transform set.
Defaults none
Command Modes CONFIG-CRYPTO-POLICY
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
636 Internet Protocol Security (IPSec)