Deployment Guide
To view current bindings, use the show hosts command. To view a DNS-related conguration, use the show
running-config resolve command.
Related Commands ip domain-name — species a DNS server.
ip domain-lookup
To address resolution (that is, DNS), enable dynamic host-name.
Syntax
ip domain-lookup
To disable DNS lookup, use the no ip domain-lookup command.
Defaults Disabled.
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
To fully enable DNS, also specify one or more domain name servers with the ip name-server command.
The Dell Networking OS does not support sending DNS queries over a VLAN. DNS queries are sent out all other
interfaces, including the Management port.
To view current bindings, use the show hosts command.
Related Commands
ip name-server — species a DNS server.
show hosts — Views the current bindings.
ip domain-name
Congure one domain name for the switch.
Syntax
ip domain-name name
To remove the domain name, use the no ip domain-name command.
Parameters
name Enter one domain name to be used to complete unqualied names (that is, incomplete
domain names that cannot be resolved).
Defaults Not congured.
Command Modes CONFIGURATION
Supported Modes Full–Switch
IPv4 Routing 603