Deployment Guide
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information To clear Layer 3 CAM inconsistencies, use this command.
CAUTION: Executing this command causes trac disruption.
Related Commands show ip b stack-unit — shows FIB entries.
clear ip route
Clear one or all routes in the routing table.
Syntax
clear ip route {* | ip-address mask}
Parameters
* Enter an asterisk (*) to clear all learned IP routes.
ip-address mask Enter a specic IP address and mask in dotted decimal format to clear that IP address
from the routing table.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands
ip route — assigns an IP route to the switch.
show ip route — views the routing table.
show ip route summary — views a summary of the routing table.
clear tcp statistics
Clear the TCP counters.
Syntax
clear tcp statistics
Command Modes EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
596 IPv4 Routing