Deployment Guide

no shutdown
Dell(conf-if)#
show cong (from INTERFACE RANGE mode)
Display the bulk congured interfaces (group).
Syntax
show config
Command Modes CONFIGURATION INTERFACE (conf-if-range)
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Example
show interfaces
Displays information on a specic physical interface or virtual interface.
Syntax
show interfaces interface
Parameters
interface Enter one of the following keywords and slot/port or number information:
• For the management interface on the stack-unit, enter the keyword
managementethernet followed by slot/port information. The slot and port range is
0.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
•
For a VLAN interface, enter the keyword vlan followed by a number from 1 to 4094.
• For a Port Channel interface, enter the keyword port-channel followed by a
number. The range is from 1 to 128.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
550 Interfaces