Deployment Guide

To return to the default, use the no interface {primary interface secondary interface
control-vlan vlan-id} command.
Parameters
primary interface Enter the keyword primary to congure the primary interface then one of the following
interfaces and slot/port information:
• Fast Ethernet interface: enter the keyword FastEthernet then the slot/
port information.
•
Port Channel interface: enter the keyword port-channel then a number.
The range is from 1 to 128.
• 10-Gigabit Ethernet interface: enter the keyword
TenGigabitEthernet then the slot/port information
secondary interface Enter the keyword secondary to congure the secondary interface then one of the
following interfaces and slot/port information:
• Fast Ethernet interface: enter the keyword FastEthernet then the slot/
port information.
•
Port Channel interface: enter the keyword port-channel then a number.
The range is from 1 to 128.
• 10-Gigabit Ethernet interface: enter the keyword
TenGigabitEthernet then the slot/port information
control-vlan vlan-id Enter the keyword control-vlan then the VLAN ID. The range is from 1 to 4094.
Defaults none
Command Modes CONFIGURATION (conf-frrp)
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information This command causes the Ring Manager to take ownership of the two ports after IFM validates the conguration.
Ownership is relinquished for a port only when the interface does not play a part in any control VLAN, that is, the
interface does not belong to any ring.
Related Commands show frrp — displays the resilient ring protocol conguration information.
member-vlan
Specify the member VLAN identication numbers.
Syntax
member-vlan {vlan-range}
To return to the default, use the no member-vlan [vlan-range] command.
Parameters
vlan-range Enter the member VLANs using VLAN IDs (separated by commas), a range of VLAN IDs
(separated by a hyphen), a single VLAN ID, or a combination. For example: VLAN IDs
(comma-separated): 3, 4, 6. Range (hyphen-separated): 5-10. Combination: 3, 4, 5-10, 8.
500 Force10 Resilient Ring Protocol (FRRP)