Deployment Guide

Command History
Version Description
9.9(0.0) Introduced on the FN MXL.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information Executing this command without the optional ring-id command clears the statistics counters on all the available
rings. The system requires a command line conrmation before the command executes. This command clears the
following counters:
• hello Rx and Tx counters
• Topology change Rx and Tx counters
• The number of state change counters
Example
Dell#clear frrp
Clear frrp statistics counter on all ring [confirm] yes
Dell#clear frrp 4
Clear frrp statistics counter for ring 4 [confirm] yes
Dell#
Related Commands show frrp — displays the resilient ring protocol conguration.
debug frrp
Clear the FRRP statistics counters.
Syntax
debug frrp {event | packet | detail} [ring-id] [count number]
To disable debugging, use the no debug frrp {event | packet | detail} {ring-id}
[countnumber] command.
Parameters
event Enter the keyword event to display debug information related to ring protocol transitions.
packet Enter the keyword packet to display brief debug information related to control packets.
detail Enter the keyword detail to display detailed debug information related to the entire ring
protocol packets.
ring-id (Optional) Enter the ring identication number. The range is from 1 to 255.
count number Enter the keyword count then the number of debug outputs. The range is from 1 to
65534.
Defaults Disabled.
Command Modes CONFIGURATION (conf-frrp)
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
498 Force10 Resilient Ring Protocol (FRRP)