Deployment Guide

• shutdown all
• shutdown address-family-ipv4–multicast
• shutdown address-family-ipv4–unicast
• shutdown address-family-ipv6–unicast
• show capture bgp-pdu neighbor
• show cong
• show ip bgp
• show ip bgp cluster-list
• show ip bgp community
• show ip bgp community-list
• show ip bgp dampened-paths
• show ip bgp detail
• show ip bgp extcommunity-list
• show ip bgp lter-list
• show ip bgp ap-statistics
• show ip bgp inconsistent-as
• show ip bgp neighbors
• show ip bgp next-hop
• show ip bgp paths
• show ip bgp paths as-path
• show ip bgp paths community
• show ip bgp peer-group
• show ip bgp regexp
• show ip bgp summary
• show running-cong bgp
• timers bgp
• MBGP Commands
• BGP Extended Communities (RFC 4360)
• set extcommunity rt
• set extcommunity soo
• show ip bgp paths extcommunity
• show ip bgp extcommunity-list
• IPv6 BGP Commands
• bgp soft-recong-backup
• clear ip bgp ipv6 unicast soft
• debug ip bgp ipv6 unicast soft-reconguration
• ipv6 prex-list
• show ipv6 prex-list
• IPv6 MBGP Commands
• show ipv6 mbgproutes
BGPv4 Commands
Border gateway protocol (BGP) is an external gateway protocol that transmits interdomain routing information within and between
autonomous systems (AS).
BGP version 4 (BGPv4) supports classless interdomain routing (CIDR) and the aggregation of routes and AS paths. Basically, two routers
(called neighbors or peers) exchange information including full routing tables and periodically send messages to update those routing tables.
286
Border Gateway Protocol IPv4 (BGPv4)