Deployment Guide

Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.8.0 Added support for BFD for BGP on the S4810.
8.4.1.3 Added support for BFD for BGP on the E-Series.
8.2.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the C-Series.
7.5.1.0 Added support for BFD for VLAN and port-channel interfaces on the E-Series.
7.4.1.0 Introduced BFD on physical ports on the E-Series.
Example
The following example shows the show bfd vrf neighbors command output.
Example (Detail)
Related Commands
• bfd all-neighbors — establish BFD sessions with all neighbors discovered by the IS-IS protocol or OSPF
protocol out of all interfaces.
vrrp bfd neighbor
Establish a BFD for VRRP session with a neighbor.
Syntax
vrrp bfd neighbor ip-address
Parameters
neighbor ip-address Enter the IP address of the BFD neighbor.
Defaults none
Command Modes INTERFACE
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Bidirectional Forwarding Detection (BFD) 283