Deployment Guide

You can create an ACL VLAN group and attach the ACL with the VLAN members. Optimization is applicable only
when you create an ACL VLAN group. If you apply an ACL separately on the VLAN interface, each ACL maps with
the VLAN and increased CAM space utilization occurs.
Attaching an ACL individually to VLAN interfaces is similar to the behavior of ACL-VLAN mapping storage in CAM
prior to the implementation of the ACL VLAN group functionality.
show acl-vlan-group detail
Display all the ACL VLAN Groups or display a specic ACL VLAN Group by name. To display the names in their entirety, the output displays
in a line-by-line format.
Syntax
show acl-vlan-group detail
Parameters
detail
Display information in a line-by-line format to display the names in their entirety.
Without the detail option, the output is displayed in a table style and information may be
truncated.
Default No default behavior or values
Command Modes
EXEC
EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.3(0.0) Introduced on the MXL 10/40GbE Switch IO Module platform.
Usage Information The output for this command displays in a line-by-line format. This allows the ACL-VLAN-Group names (or the
Access List Group Names) to display in their entirety.
Examples The following sample output shows the line-by-line style display when using the show acl-vlan-group
detail option. Note that no group or access list names are truncated
Dell#show acl-vlan-group detail
Group Name :
Test
Egress IP Acl :
-
Ingress IP Acl :
test
Ingress IPV6 Acl :
-
Vlan Members :
1-100
270 Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM)