Deployment Guide

9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell(conf-if-vrid-4)#show con
vrrp-group 4
virtual-address 119.192.182.124
!
show vrrp
View the VRRP groups that are active. If no VRRP groups are active, the system returns No Active VRRP group.
Syntax
show vrrp [vrrp-id] [interface] [brief]
Parameters
vrrp-id (OPTIONAL) Enter the Virtual Router Identier for the VRRP group to view only that
group. The range is from 1 to 255.
interface (OPTIONAL) Enter the following keywords and slot/port or number information:
For Port Channel interface types, enter the keywords port-channel then the
number. The range is from 1 to 128.
For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
For a VLAN interface, enter the keyword vlan then the VLAN ID. The VLAN ID range
is from 1 to 4094.
brief (OPTIONAL) Enter the keyword brief to view a table of information on the VRRP
groups.
Command Modes
EXEC
EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The following describes the show vrrp brief command shown in the following example.
Item Description
Interface Lists the interface type, slot and port on which the VRRP group is congured.
Grp Displays the VRRP group ID.
Pri Displays the priority value assigned to the interface. If the track command is congured
to track that interface and the interface is disabled, the cost is subtracted from the
priority value assigned to the interface.
Pre States whether preempt is enabled on the interface.
Y = Preempt is enabled.
Virtual Router Redundancy Protocol (VRRP) 1351