Deployment Guide

dot1x reauth-max
dot1x server-timeout
dot1x supplicant-timeout
dot1x tx-period
show dot1x cos-mapping interface
show dot1x interface
debug dot1x
Display 802.1X debugging information.
Syntax
debug dot1x [all | auth-pae-fsm | backend-fsm | eapol-pdu] [interface
interface]
Parameters
all Enable all 802.1X debug messages.
auth-pae-fsm Enable authentication PAE FSM debug messages.
backend-fsm Enable backend FSM debug messages.
eapol-pdu Enable the EAPOL frame trace and related debug messages.
interface interface Restricts the debugging information to an interface.
Defaults Disabled
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
dot1x authentication (Conguration)
Enable dot1x globally. Enable dot1x both globally and at the interface level.
Syntax
dot1x authentication
To disable dot1x on a globally, use the no dot1x authentication command.
Defaults Disabled
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands dot1x authentication (Interface) — Enables dot1x on an interface.
134 802.1X