Deployment Guide
undebug all
Disable all debug operations on the system.
Syntax
undebug all
Defaults none
Command Modes
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
virtual-ip
Congure a virtual IP address for the active management interface. You can congure virtual addresses both for IPv4 independently.
Syntax
virtual-ip {ipv4-address}
Parameters
ipv4-address Enter the IP address of the active management interface in a dotted decimal format
(A.B.C.D.).
Defaults none
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information Each time you issue this command, it replaces the previously congured address of the same family. The no
virtual-ip command takes an address/prex-length argument, so that the desired address only is removed. If
you enter the
no virtual-ip command without any specied address, the IPv4 virtual addresses are removed.
Example
Dell#virtual-ip 10.11.197.99/16
write
Copy the current conguration to either the startup-conguration le or the terminal.
Syntax
write {memory | terminal}
Control and Monitoring 131