Deployment Guide

Version Description
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
Related Commands
servercongure the name of the remote SupportAssist server.
url
Congure the URL to reach the SupportAssist remote server.
Syntax
url uniform-resource-locator
To delete the URL for the server, use the no url command.
Parameters
uniform-resource-
locator
Enter a text string for the URL using one of the following formats:
http://[username:password@]<hostip>:<portNum>/<lepath>
https://[username:password@]<hostip>:<portNum>/<lepath>
NOTE: The host IP for the server may be specied as an IPv4 address,
an IPv6 address or as a DNS hostname. If using the DNS hostname,
the DNS resolver will need to be congured and enabled.
Command Modes SUPPORTASSIST SERVER
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the M I/O Aggregator and FN IOM.
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
Usage Information The URL should be formatted to follow the ISO format.
show eula-consent
Display the EULA for the feature.
Syntax
show eula-consent {support-assist | other feature}
Parameters
support-assist |
other feature
Enter the keywords support-assist or the text corresponding to other feature.
Command Modes EXEC Privilege
SupportAssist 1269