Deployment Guide

To disable unknown-unicast storm control on the interface, use the no storm-control unknown-unicast
[packets_per_second in] command.
Parameters
packets_per_secon
d
Enter the packets per second of broadcast trac allowed into the network. The range is
from 0 to 33554431.
Command Modes INTERFACE (conf-if-interface-slot/port)
Supported Modes Programmable-Mux (PMUX)
Full–Switch Mode
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
9.2(0.0) Introduced on the M I/O Aggregator.
Storm Control 1251