Deployment Guide

Dell#
Related Commands
show cong (from INTERFACE VLAN mode) — displays information on a specic physical interface or virtual
interface.
show memory
Display current memory usage on the M I/O Aggregator.
Syntax
show memory [stack-unit 0–5]
Parameters
stack-unit 0–5 (OPTIONAL) Enter the keywords stack-unit then the stack unit ID of the stack
member to display memory information on the designated stack member.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information The output for show memory command displays the memory usage of LP part (sysdlp) of the system. The sysdlp
is an aggregate task that handles all the tasks running on the CPU.
Example
Dell#show memory
Statistics On Unit 0 Processor
===========================
Total(b) Used(b) Free(b) Lowest(b) Largest(b)
268435456 4010354 264425102 264375410 264425102
show processes cpu
Displays CPU usage information based on processes running.
Syntax
show processes cpu [management-unit 1-99 [details] | stack-unit 0–5 | summary ]
Parameters
management-unit
1-99 [details]
(OPTIONAL) Display processes running in the control processor. The 1-99 variable sets
the number of tasks to display in order of the highest CPU usage in the past ve (5)
seconds. Add the keyword details to display all running processes (except sysdlp).
Refer to Example (management-unit).
stack-unit 0–5 (OPTIONAL) Enter the keywords stack-unit then the stack member ID. The range is
from 0 to 5.
As an option of the show processes cpu command, this option displays CPU usage
for the designated stack member. Or, as an option of
memory, this option limits the
114 Control and Monitoring