Deployment Guide

Received 100% traffic on TenGigabitEthernet 8/2 Total packets:100
LLC:0, SNAP:0, IP:100, ARP:0, other:0
Unicast:100, Multicast:0, Broadcast:0
Dell#
Related Commands debug cpu-trac-stats — enables CPU trac statistics for debugging.
show debugging
View a list of all enabled debugging processes.
Syntax
show debugging
Command Modes EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell#show debug
Generic IP: (Access List: test)
IP packet debugging is on for (Access List: test)
TenGigabitEthernet 0/16
ICMP packet debugging is on for
TenGigabitEthernet 0/16
OSPF:1
OSPF packet debugging is on
DHCP:
DHCP debugging is on
Dell#
show diag
Display the diagnostics information.
Syntax
show diag {information | stack-unit number [detail | summary]] | testcase}
Parameters
information Enter the keyword information to view current diagnostics information in the system.
stack-unit unit-id (OPTIONAL) Enter the keywords stack-unit then the unit-id to display information on
a specic stack member. The range is from 0 to 5.
detail (OPTIONAL) Enter the keyword detail to view detailed diagnostics information.
summary (OPTIONAL) Enter the keyword summary to view a summary of the diagnostics
information.
testcase Enter the keyword testcase to view current diagnostics testcases available in the
system.
Defaults Summary
Command Modes EXEC Privilege
Control and Monitoring 111