Deployment Guide

Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the M I/O Aggregator.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
To specify the name of the input QoS policy, use this command. After the input policy is specied, rate-police is
dened. This command enables Qos-Policy-Input Conguration mode — (conf-qos-policy-in).
When changing a Service-Queue conguration in a QoS policy map, all QoS rules are deleted and re-added
automatically to ensure that the order of the rules is maintained. As a result, the Matched Packets value shown in
the show qos statistics command is reset.
Related Commands rate police — incoming trac policing function.
qos-policy-output
Create a QoS output policy.
Syntax
qos-policy-output qos-policy-name
To remove an existing output QoS policy, use the no qos-policy-output qos-policy-name command.
Parameters
qos-policy-name Enter your output QoS policy name in character format (32 characters maximum).
Defaults none
Command Modes CONFIGURATION
Supported Modes Programmable-Mux (PMUX)
Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
9.2(0.0) Introduced on the M I/O Aggregator.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
To specify the name of the output QoS policy, use this command. After the output policy is specied, rate-limit,
bandwidth-percentage, and WRED can be dened. This command enables Qos-Policy-Output Conguration mode
— (conf-qos-policy-out).
Related Commands
bandwidth-percentage — assigns weight to the class/queue percentage.
Quality of Service (QoS) 1067