Deployment Guide

• EXEC Privilege
Supported Modes Full—Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced the on MXL 10/40GbE Switch IO Module.
Usage Information
The output of this command, shown below, displays the community and isolated VLAN IDs that are associated with
each primary VLAN.
Example
Dell# show vlan private-vlan mapping
Private Vlan:
Primary : 100
Isolated : 102
Community : 101
Unknown : 200
Related Commands
private-vlan mode — sets the mode of the selected VLAN to community, isolated, or primary.
show vlan private-vlan — displays type and status of PVLAN interfaces.
show vlan private-vlan mapping — displays the primary-secondary VLAN mapping.
switchport mode private-vlan — sets PVLAN mode of the selected port.
switchport mode private-vlan
Set PVLAN mode of the selected port.
Syntax
[no] switchport mode private-vlan {host | promiscuous | trunk}
To remove PVLAN mode from the selected port, use the no switchport mode private-vlan command.
Parameters
host Enter the keyword host to congure the selected port or port channel as an isolated
interface in a PVLAN.
promiscuous Enter the keyword promiscuous to congure the selected port or port channel as an
promiscuous interface.
trunk Enter the keyword trunk to congure the selected port or port channel as a trunk port
in a PVLAN.
Defaults Disabled.
Command Modes INTERFACE
Supported Modes Full—Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
1036 Private VLAN (PVLAN)