CLI Guide
Version Description
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information You cannot delete a terminal connection.
Related Commands show memory— View current memory usage on the M I/O Aggregator.
login concurrent-session
Congures the limit of concurrent sessions for all users on console and virtual terminal lines.
Syntax
login concurrent-session {limit number-of-sessions | clear—line enable}
no login concurrent session {limit number-of-sessions | clear—line enable}
Parameters
limit number-of-
sessions
Sets the number of concurrent sessions that any user can have on console and virtual
terminal lines. The range is from 1 to 12 (10 VTY lines, one console, and one AUX line).
clear-line enable
Enables you to clear your existing sessions.
Defaults Not congured. You can use all the available sessions.
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.8(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
You must have either the System Administrator or Security Administrator privileges to congure login concurrent-
session limit or to enable clear-line.
Use the login concurrent-session limit number-of-sessions command to limit the number of
concurrent sessions that any user can have on console, aux, and virtual terminal lines.
If the login concurrent-session clear-line enable command is congured, you are provided with
an option to clear any of your existing sessions after a successful login authentication. When you reach the
maximum concurrent session limit, you can still login by clearing any of your existing sessions.
Example
The following example shows how to limit the number of concurrent sessions that any user can have to four:
Dell(conf)#login concurrent-session limit 4
Dell(conf)#
The following example shows how to use the login concurrent-session clear-line enable
command.
Dell(conf)#login concurrent-session clear-line enable
Dell(conf)#
Control and Monitoring 99