CLI Guide

Parameters
interface interface
(OPTIONAL) Displays information about the SAs used on a specied OSPFv3 interface,
where interface is one of the following values:
• For a Port Channel interface, enter port-channel then the port channel number.
• For a 10-Gigabit Ethernet interface, enter TenGigabitEthernet then the slot/
port number.
• For a VLAN interface, enter vlan vlan-id. The valid VLAN IDs range is from 1 to
4094.
Defaults none
Command Modes
EXEC
EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
The show crypto ipsec sa ipv6 command output displays security associations set up for OSPFv3 links in
IPsec authentication and encryption policies on the router.
show ipv6 ospf database
Display information in the OSPFv3 database, including link-state advertisements (LSAs).
Syntax
show ipv6 ospf database [database-summary | grace-lsa]
Parameters
database-summary
(OPTIONAL) Enter the keywords database-summary to view a summary of database
LSA information.
grace-lsa
(OPTIONAL): Enter the keywords grace-lsa to display the Type-11 Grace LSAs sent
and received on an OSPFv3 router.
Defaults none
Command Modes
EXEC
EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
978 Open Shortest Path First (OSPFv2 and OSPFv3)