CLI Guide

00:59:45 : OSPFv3INFO: Bfd Msg Type Up for interface Te 0/2
00:59:45 : OSPFv3INFO: OSPFV3 updating NBR state
debug ipv6 ospf
Display debug information and interface types on OSPF IPv6 packets or events.
Syntax
debug ipv6 ospf {packet | events} [interface]
Parameters
interface
(OPTIONAL) Enter one of the following keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
• For a Port Channel interface, enter the keyword port-channel then a number. The
range is 1 to 128.
•
For a tunnel interface, enter the keyword tunnel then a number. The range is 1 to
16383.
• For a VLAN, enter the keyword vlan then a number from 1 to 4094.
Command Modes EXEC Privilege
Supported Modes Full—Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
debug ipv6 ospf spf
Display debug information for SPF timers on OSPF IPv6 packets.
Syntax
[no] debug ipv6 ospf spf
Parameters
interface
(OPTIONAL) Enter one of the following keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
•
For a port channel interface, enter the keywords port-channel then a number.
• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
964 Open Shortest Path First (OSPFv2 and OSPFv3)