CLI Guide

Usage Information
FIP keepalive (FKA) messaging is used to detect if other FCoE devices are reachable.
To remove FIP keepalive monitoring from an FCoE map, enter the no keepalive command.
Related Commands
fcoe-map— creates an FCoE map which contains the parameters used in the communication between servers
and a SAN fabric.
show fcoe-map— displays the Fibre Channel and FCoE conguration parameters in FCoE maps.
show fcoe-map
Displays the Fibre Channel and FCoE conguration parameters in FCoE maps.
Syntax
show fcoe-map [brief | map-name]
Parameters
brief Displays an overview of currently congured FCoE maps.
map-name Displays the FC and FCoE conguration parameters in a specied FCoE map. The FCoE
map is applied on Ethernet (FCoE) and FC ports to transmit FC storage trac to a
specied fabric.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.6(0.0) Supported on the FN2210S Aggregator.
9.3(0.0) Introduced on the M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex IO
module.
Usage Information
Use the show fcoe-map command to display the FC and FCoE parameters used to congure server-facing
Ethernet (FCoE) and fabric-facing FC ports in all FCoE maps on an FN 2210S Aggregator with the FC Flex IO
module NPIV proxy gateway.
In each FCoE map, the values for the fabric ID and FC-MAP that identify the SAN fabric to which FC storage
trac is sent, and the FCoE VLAN to be used must be unique.
The following describes the show fcoe-map brief output shown in the example.
Field Description
Fabric-Name Name of a SAN fabric.
Fabric ID The ID number of the SAN fabric to which FC trac is forwarded.
VLAN ID The dedicated FCoE VLAN used to transport FCoE storage trac between servers and a
fabric over the NPIV proxy gateway. The congured VLAN ID must be the same as the
fabric ID.
NPIV Proxy Gateway 897