CLI Guide
Related Commands show cpu-trac-stats— displays the cpu trac statistics.
debug ifm trace-ags
Turn on the IFM internal trace-ags.
Syntax
debug ifm trace-flags trace-flags
To disable this command, use the no debug ifm trace-flags command.
Parameters
trace-ags Enter a hexadecimal number representing the trace-ag.
Defaults None
Command Modes EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
NOTE: Use this command only when you are working directly with a technical support representative to
troubleshoot a problem. Do not use this command unless a technical support representative instructs
you to do so.
debug ftpserver
View transactions during an FTP session when a user is logged into the FTP server.
Syntax
debug ftpserver
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
disable
Return to EXEC mode.
Syntax
disable [level]
Control and Monitoring 87