CLI Guide

prompt
keyboard-interactive Prompt will be displayed by default
If you congure the acknowledgement keyword, the system requires a positive acknowledgement from the user
while logging in to the system.
$ telnet 10.11.178.16
Trying 10.11.178.16...
Connected to 10.11.178.16.
Escape character is '^]'.
THIS IS A LOGIN BANNER. PRESS ‘Y’ TO ACKNOWLEDGE. ACKNOWLEDGE?
[y/n]: y
Login: admin
Password:
Related Commands
banner motd — sets a Message of the Day banner.
exec-banner — enables the display of a text string when you enter EXEC mode.
banner motd
Set a message of the day (MOTD) banner.
Syntax
banner motd c line c
Parameters
c Enter a delineator character to specify the limits of the text banner. The delineator is a
percent character (%).
line Enter a text string for your message of the day banner message ending the message with
your delineator. The delineator is a percent character (%).
Defaults No banner is congured.
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information A MOTD banner message displays only in EXEC Privilege mode after entering the enable command then the
password. These banners do not display to users in EXEC (non-privilege) mode.
Related Commands
banner exec — enables the display of a text string when you enter EXEC mode.
banner login — sets a banner to display after successful login to the system.
clear alarms
Clear the alarms on the system.
Syntax
clear alarms
84 Control and Monitoring