CLI Guide

show ip bgp ipv6 unicast inconsistent-as
View routes with inconsistent originating autonomous system (AS) numbers; that is, prexes that are announced from the same neighbor
AS but with a dierent AS-Path.
Syntax
show ip bgp ipv6 unicast inconsistent-as
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
show ip bgp ipv6 unicast neighbors
Displays information on IPv6 unicast routes exchanged by BGP neighbors.
Syntax
show ip bgp ipv6 unicast neighbors [ipv4-neighbor-addr | ipv6-neighbor-addr]
[advertised-routes | dampened-routes | detail | flap-statistics | routes |
received-routes [network [network-mask]] | denied-routes [network [network-
mask]]]
Parameters
ipv6 unicast Enter the keywords ipv6 unicast to view information only related to IPv6 unicast
routes.
ipv4-neighbor-addr
| ipv6-neighbor-
addr
(OPTIONAL) Enter the IP address of the neighbor to view only BGP route information
exchanged with that neighbor.
advertised-routes (OPTIONAL) Enter the keywords advertised-routes to view only the routes the
neighbor sent.
dampened-routes (OPTIONAL) Enter the keywords dampened-routes to view information on dampened
routes from the BGP neighbor.
detail (OPTIONAL) Enter the keyword detail to view neighbor-specic internal information
for the IPv4 Unicast address family.
ap-statistics (OPTIONAL) Enter the keywords flap-statistics to view ap statistics on the
neighbor’s routes.
routes (OPTIONAL) Enter the keyword routes to view only the neighbor’s feasible routes.
received-routes
[network [network-
mask]
(OPTIONAL) Enter the keywords received-routes then either the network address
(in dotted decimal format) or the network mask (in slash prex format) to view all
information received from neighbors.
IPv6 Border Gateway Protocol (IPv6 BGP) 715