CLI Guide

Related Commands show ip bgp ipv6 unicast summary — displays the current BGP conguration.

neighbor X:X:X::X password

Enable TCP MD5 Authentication for an IPv6 BGP peer session.

Syntax

neighbor x:x:x::x password {7 <encrypt-pass> | <clear-pass}

To return to the default setting, use the no neighbor x:x:x::x password command.

Parameters

encrypt-pass Enter the encrypted password.

clear-pass Enter the clear text password.

Defaults Disabled.

Command Modes ROUTER BGPV6-ADDRESS FAMILY

Supported Modes Full–Switch

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information The TCP session is authentication and prevents the data from being compromised.

neighbor next-hop-self

Allows you to congure the router as the next hop for a BGP neighbor. (This command is used for IBGP).

Syntax

neighbor {ipv6-address | peer-group-name} next-hop-self

To return to the default setting, use the no neighbor {ipv6-address | peer-group-name} next-

hop-self command.

Parameters

ipv6-address Enter the IPv6 address in the x:x:x:x::x format.

NOTE: The :: notation species successive hexadecimal elds of zeros.

peer-group-name (OPTIONAL) Enter the name of the peer group.