CLI Guide

debug ip bgp notications
Allows you to view information about BGP notications received from neighbors.
Syntax
debug ip bgp [ipv6-address | peer-group peer-group-name] notifications [in |
out]
To disable debugging, use the no debug ip bgp [ip-address | peer-group peer-group-name]
notifications [in | out] command.
Parameters
ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format then the prex length in
the /x format. The range is from /0 to /128.
NOTE: The :: notation species successive hexadecimal elds of zeros.
peer-group peer-
group-name
(OPTIONAL) Enter the keywords peer-group then the name of the peer group.
in (OPTIONAL) Enter the keyword in to view BGP notications received from neighbors.
out (OPTIONAL) Enter the keyword out to view BGP notications sent to neighbors.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
Entering a no debug ip bgp command removes all congured debug commands for BGP.
debug ip bgp updates
Allows you to view information about BGP updates.
Syntax
debug ip bgp [ipv6-address | peer-group peer-group-name | ipv6 unicast [ipv6-
address]] updates [in | out | prefix-list prefix-list-name]
To disable debugging, use the no debug ip bgp [ip-address | peer-group peer-group-name |
ipv6 unicast [ipv6-address]] updates [in | out] command.
Parameters
ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format then the prex length in
the /x format. The range is from /0 to /128.
NOTE: The :: notation species successive hexadecimal elds of zeros.
peer-group peer-
group-name
(OPTIONAL) Enter the keywords peer-group then the name of the peer group.
IPv6 Border Gateway Protocol (IPv6 BGP) 685