CLI Guide

Parameters
as-number Enter an autonomous system (AS) number to reset neighbors belonging to that AS. If
used without a qualier, the keyword resets all neighbors belonging to that AS. The range
is from 1 to 65535.
ap-statistics (OPTIONAL) Enter the keywords flap-statistics to clear all ap statistics
belonging to that AS or a specied address family within that AS.
ipv4 (OPTIONAL) Enter the keyword ipv4 to select options for that address family.
ipv6 (OPTIONAL) Enter the keyword ipv6 to select options for that address family.
unicast (OPTIONAL) Enter the keyword unicast to select the unicast option within the
selected address family.
multicast (OPTIONAL) Enter the keyword multicast to select the multicast option within the
selected address family. Multicast is supported on IPv4 only.
soft (OPTIONAL) Enter the keyword soft to congure and activate policies without resetting
the BGP TCP session; that is, BGP Soft Reconguration.
NOTE: If you enter clear ip bgp ipv6-address soft, both inbound
and outbound policies are reset.
in (OPTIONAL) Enter the keyword in to activate only inbound policies.
out (OPTIONAL) Enter the keyword out to activate only outbound policies.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
clear ip bgp ipv6-address
Reset BGP sessions specic to an IPv6 address. The soft parameter (BGP Soft Reconguration) clears the policies without resetting the
TCP connection.
Syntax
clear ip bgp ipv6-address [flap-statistics | ipv4 {multicast {flap-statistics |
soft {in | out}} | unicast {flap-statistics | soft {in | out}} | ipv6 unicast
{flap-statistics | soft {in | out}| soft [in | out]
Parameters
ipv6-address Enter an IPv6 address to reset neighbors belonging to that IP. Used without a qualier,
the keyword ipv6–address resets all neighbors belonging to that IP.
ap-statistics (OPTIONAL) Enter the keywords flap-statistics to clear all ap statistics
belonging to that AS or a specied address family within that IP.
ipv4 (OPTIONAL) Enter the keyword ipv4 to select options for that address family.
ipv6 (OPTIONAL) Enter the keyword ipv6 to select options for that address family.
unicast (OPTIONAL) Enter the keyword unicast to select the unicast option within the
selected address family.
678 IPv6 Border Gateway Protocol (IPv6 BGP)