CLI Guide

Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information Host tables are not stored in CAM tables. Entries for camIndex displays as zero (0) on the show ipv6 fib
stack-unit output for neighbor entries, such as address resolution protocol (ARP) entries.
show ipv6 owlabel-zero
Display the ow label zero setting.
Syntax
show ipv6 flowlabel-zero
Default Disabled
Command Modes EXEC
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands ipv6 nd dad attempts — Congure system to set the ow label eld in the packets to zero.
show ipv6 interface
Display the status of interfaces congured for IPv6.
Syntax
show ipv6 interface interface [brief] [configured] [gigabitethernet slot |
slot/port] [linecard slot-number][loopback interface-number]
[managementethernet slot/port] [port-channel number] [tengigabitethernet slot |
slot/port] [fortyGigE slot | slot/port] [vlan vlan-id]
Parameters
interface (OPTIONAL) Enter the following keywords and slot/port or number information:
• For a Loopback interface, enter the keyword Loopback then a number from 0 to
16383.
• For the Null interface, enter the keyword null then zero (0).
•
For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
• For stacking, enter the keywords stack-unit then the stack-unit ID.
• For a tunnel interface, enter the keyword tunnel then the tunnel ID.
• For a VLAN interface, enter the keyword VLAN.
• For a port channel interface, enter the keywords port-channel.
brief (OPTIONAL) View a summary of IPv6 interfaces.
congured (OPTIONAL) View information on all IPv6 congured interfaces.
656 IPv6 Basics