CLI Guide
Where to Go From Here
You can customize the Aggregator for use in your data center network as necessary. To perform additional switch conguration, do one of
the following:
• For remote out-of-band management, enter the OOB management interface IP address into a Telnet or SSH client and log in to the
switch using the user ID and password to access the CLI.
• For local management using the CLI, use the attached console connection.
• For remote in-band management from a network management station, enter the VLAN IP address of the management port and log in
to the switch to access the CLI.
If you installed the Aggregator in a stack, you can congure additional settings for switch stacking
In case of a Dell Networking OS upgrade, you can check to see that an Aggregator is running the latest Dell Networking OS version by
entering the show version command. To download a Dell Networking OS version, go to http://support.dell.com.
Refer to the appropriate chapter for detailed information on how to congure specic software settings.
Before You Start 51