CLI Guide

Vlan Id 1002
Vlan priority 3
FC-MAP 0efc00
FKA-ADV-Period 8
Fcf Priority 128
Config-State ACTIVE
Oper-State DOWN
=======================================================
Members
Fc 0/9 Fc 0/10
=======================================================
=======================================================
Dell#
Related Commands
fcoe-map — creates an FCoE map which contains the parameters used in the communication between servers
and a SAN fabric.
show system stack-unit port-group portmode
Display the port-group port mode information.
Syntax
show system stack-unit unit-number port-group portmode
Parameters
stack-unit unit-
number
Enter the keywords stack-unit then the unit number. The range is from 0 to 11.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
9.11(0.0) Included support for all external ports.
9.6(0.0) Supported on the FN2210S Aggregator.
Example
Dell#show system stack-unit 0 port-group portmode
PortGroupId Ports Mode(Curr Boot) Mode(Next Boot)
0 9 FC FC
0 10 FC FC
1 11 ETH ETH
1 12 FC FC
Dell#
Related Commands stack-unit port-group port portmode — converts the external ports to Fibre Channel or Ethernet mode.
476 FC FLEXIO FPORT