CLI Guide

To return to the default value, use the no neighbor {ip-address | peer-group-name}

advertisement-interval command.

Parameters

ip-address (OPTIONAL) Enter the IP address of the neighbor in dotted decimal format.

peer-group-name Enter the name of the peer group to set the advertisement interval for all routers in the

peer group.

seconds Enter a number as the time interval, in seconds, between BGP advertisements. The range

is from 0 to 600 seconds. The default is 5 seconds for internal BGP peers and 30

seconds for external BGP peers.

Defaults

• seconds = 5 seconds (internal peers)

• seconds = 30 seconds (external peers)

Command Modes ROUTER BGP

Supported Modes Full–Switch

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.

neighbor advertisement-start

To send BGP routing updates, set the minimum interval before starting.

Syntax

neighbor {ip-address} advertisement-start seconds

To return to the default value, use the no neighbor {ip-address} advertisement-start command.

Parameters

ip-address (OPTIONAL) Enter the IP address of the neighbor in dotted decimal format.

seconds Enter a number as the time interval, in seconds, before BGP route updates are sent. The

range is from 0 to 3600 seconds.