CLI Guide

Used Packet Buffer: 0
----- Buffer Stats for Interface Te 1/6 Queue 6 -----
Maximum Shared Limit: 7667
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
<output truncated for brevity>
Related Commands
show interfaces stack-unit — displays information on all interfaces on a specic stack member.
show processes cpu — displays CPU usage information based on running processes.
show system — displays the current status of all stack members or a specic member.
show hardware system-ow
Display Layer 2 ACL or QoS data for the selected stack member and stack member port-pipe.
Syntax
show hardware system-flow layer2 stack-unit 0–5 port-set 0–0 [counters]
Parameters
acl | qos For the selected stack member and stack member port-pipe, display which system ow
entry the packet hits and what queue the packet takes as it dumps the raw system ow
tables.
stack-unit 0–5 Enter the keywords stack-unit then 0 to 5 to select a stack member ID.
port-set 0–0
[counters]
Enter the keywords port-set with a port-pipe number—0.
(OPTIONAL) Enter the keyword counters to display hit counters for the selected ACL
or QoS option.
Defaults none
Command Modes EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
Example
Dell#show hardware system-flow layer2 stack-unit 0 port-set 0 counters
---------------------------------------------------------------------------
EntryId Description #HITS
---------------------------------------------------------------------------
767 LLDP BPDU Redirects 2611
765 LACP traffic Redirects 250
763 ARP Reply Redirects 0
762 Slow Protocol Drops 1155
758 OSPFv3 Multicast
[33:33:00:00:00:06] 0
759 OSPFv3 Multicast
[33:33:00:00:00:05] 0
756 GRAT ARP 0
711 VLT ARP Replies for Peer 0
710 ICL Hellos 0
709 ICL MAC SYNC Frames 0
708 VLT STP BPDUs Tunneled 0
707 VLT IGMP Sync Frames 0
706 VLT ARP Replies Tunneled 0
1392 Debugging and Diagnostics