CLI Guide

clear hardware system-ow

Clear system-ow statistics from selected hardware components.

Syntax

clear hardware system-flow layer2 stack-unit 0–5 port-set 0–0 counters

Parameters

stack-unit 0–5 Enter the keywords stack-unit then 0 to 5 to select a particular stack member and

then enter one of the following command options to clear a specic collection of data.

port-set 0–0

counters

Enter the keywords port-set along with a port-pipe number, then the keyword

counters to clear the system-ow counters on the selected port-pipe.

Defaults none

Command Modes EXEC Privilege

Supported Modes Full–Switch

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.

Related Commands show hardware stack-unit — displays the data plane or management plane input and output statistics of the

designated component of the designated stack member.

show hardware layer2 acl

Display Layer 2 ACL or eg data for the selected stack member and stack member port-pipe.

Syntax

show hardware layer2 acl stack-unit 0–5 port-set 0–0