CLI Guide

Version Description
9.3(0.0) Introduced on the M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex IO
module.
Usage Information
Use the show npiv devices command to display information on the server CNA, server-facing Ethernet and
fabric-facing FC ports, and the SAN fabric in each server-fabric connection over a switch with the FC Flex IO
module NPIV proxy gateway.
The following table describes the show npiv devices brief output shown in the example below.
Field Description
ENode-Intf A switch with the FC Flex IO module Ethernet interface (slot/port) to which a server
CNA is connected.
ENode-WWPN Worldwide port name (WWPN) of a server CNA port.
FCoE-Vlan VLAN ID of the dedicated VLAN used to transmit FCoE trac to and from the fabric.
Fabric-Intf Fabric-facing Fibre Channel port (slot/port) on which FC trac is transmitted to the
specied fabric.
Fabric-Map Name of the FCoE map containing the FCoE/FC conguration parameters for the server
CNA-fabric connection.
LoginMethod Method used by the server CNA to log in to the fabric; for example:
FLOGI - ENode logged in using a fabric login (FLOGI).
FDISC - ENode logged in using a fabric discovery (FDISC).
Status Operational status of the link between a server CNA port and a SAN fabric: Logged In -
Server has logged in to the fabric and is able to transmit FCoE trac.
Example
Dell# show npiv devices brief
Total NPIV Devices = 2
-------------------------------------------------------------------------------------------
ENode-Intf ENode-WWPN FCoE-Vlan Fabric-Intf Fabric-Map LoginMethod Status
------------------------------------------------------------------------------------------
Te 0/12 20:01:00:10:18:f1:94:20 1003 Fc 0/5 fid_1003 FLOGI LOGGED_IN
Te 0/13 10:00:00:00:c9:d9:9c:cb 1003 Fc 0/0 fid_1003 FDISC LOGGED_IN
Usage Information
The following table describes the show npiv devices output shown in the example below.
Field Description
ENode [number] A server CNA that has successfully logged in to a fabric over a switch with the FC Flex IO
module Ethernet port in ENode mode.
Enode MAC MAC address of a server CNA port.
Enode Intf Port number of a server-facing Ethernet port operating in ENode mode.
FCF MAC Fibre Channel forwarder MAC: MAC address of the switch with the FC Flex IO module
FCF interface.
Fabric Intf Fabric-facing Fibre Channel port (slot/port) on which FCoE trac is transmitted to the
specied fabric.
FC Flex IO Modules 1375