CLI Guide
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information
This command displays all memory utilization thresholds of the management, standby, and stack-units.
ssh-peer-stack-unit
Open an SSH connection to the peer stack-unit.
Syntax
ssh-peer-stack-unit [-| username]
Parameters
-| username (OPTIONAL) Enter the keyword -| followed by your username.
Default: The username associated with the terminal.
Defaults Not congured.
Command Modes
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.6(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
telnet
Connect through Telnet to a server. The Telnet client and server in Dell Networking OS support IPv4 connections. You can establish a
Telnet session directly to the router or a connection can be initiated from the router.
Syntax
telnet {host | ip-address [/source-interface]
Parameters
host Enter the name of a server.
ip-address Enter the IPv4 address in dotted decimal format of the server.
source-interface (OPTIONAL) Enter the keywords /source-interface then the interface information
to include the source interface. Enter the following keywords and slot/port or number
information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
Control and Monitoring 127