CLI Guide
Dell Networking OS currently only supports TACACS+ accounting.
Defaults None
Command Modes CONFIGURATION
Usage Information In the example above, TACACS+ accounting is used to track all usage of EXEC command and commands on
privilege level 15. Privilege level 15 is the default. If you want to track usage at privilege level 1 for example, use
theaaa accounting command 1 command.
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.5(0.0) Supported on the FN I/O Agregator and M I/O Aggregator.
Example
Dell(config)# aaa accounting exec default start-stop tacacs+
Dell(config)# aaa accounting command 15 default start-stop tacacs+
Dell(config)#
Related Commands
enable password changes the password for the enable command.
login authentication enables AAA login authentication on the terminal lines.
password creates a password.
tacacs-server host species a TACACS+ server host.
debug tacacs+
To assist with troubleshooting, view TACACS+ transactions.
Syntax
debug tacacs+
To disable debugging of TACACS+, use the no debug tacacs+ command.
Defaults Disabled.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
ip tacacs source-interface
Specify an interface’s IP address as the source IP address for TACACS+ connections.
Syntax
ip tacacs source-interface interface
Security 1159