CLI Guide

show users
Allows you to view information on all users logged in to the switch.
Syntax
show users [all]
Parameters
all (OPTIONAL) Enter the keyword all to view all terminal lines in the switch.
Command Modes EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.5(0.0) Introduced the support for roles on the MXL 10/40GbE Switch.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The following describes the show user command shown in the following example.
Field Description
(untitled) Indicates with an asterisk (*) which terminal line you are using.
Line Displays the terminal lines currently in use.
User Displays the user name of all users logged in.
Host(s) Displays the terminal line status.
Location Displays the IP address of the user.
Example
Dell# show users
Authorization Mode: role or privilege
Line User Role Priv Host(s) Location
* 0 console 0 unassigned 1 idle
2 vty 0 admin unassigned 1 idle 10.16.127.35
3 vty 1 ad unassigned 15 idle 10.16.127.145
4 vty 2 ad1 sysadmin 1 idle 10.16.127.141
5 vty 3 ad1 sysadmin 1 idle 10.16.127.145
6 vty 4 admin unassigned 1 idle 10.16.127.141
7 vty 5 ad unassigned 15 idle 10.16.127.141
Dell#
Related Commands username — enables a user.
secure-cli enable
Enable the secured CLI mode.
Syntax
secure-cli enable
Command Modes CONFIGURATION
Security 1149