CLI Guide

ManualsBrandsDell ManualsAccess PlatformsFN IO Module

1101

rmon collection history

Enable the RMON MIB history group of statistics collection on an interface.

Syntax

rmon collection history {controlEntry integer} [owner name] [buckets number]

[interval seconds]

To remove a specied RMON history group of statistics collection, use the no rmon collection history

{controlEntry integer} command.

Parameters

controlEntry integer Enter the keyword controlEntry to specify the RMON group of statistics using a

value. Then enter an integer value from 1 to 65535 that identies the RMON group of

statistics. The integer value must be a unique index in the RMON history table.

owner name (OPTIONAL) Enter the keyword owner then the owner name to record the owner of the

RMON group of statistics.

buckets number (OPTIONAL) Enter the keyword buckets then the number of buckets for the RMON

collection history group of statistics. The bucket range is from 1 to 1000. The default is 50.

interval seconds (OPTIONAL) Enter the keyword interval then the number of seconds in each polling

cycle. The range is from 5 to 3600 seconds. The default is 1800 seconds.

Defaults none

Command Modes CONFIGURATION INTERFACE (cong-if)

Supported Modes Full–Switch

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.

rmon collection statistics

Enable RMON MIB statistics collection on an interface.

Syntax

rmon collection statistics {controlEntry integer} [owner name]

To remove RMON MIB statistics collection on an interface, use the no rmon collection statistics