CLI Guide

ManualsBrandsDell ManualsAccess PlatformsFN IO Module

1061

The match ip precedence command and the match ip dscp command are mutually exclusive.

Up to eight precedence values can be matched in one match statement. For example, to indicate the IP

precedence values 0 1 2 3, enter either the match ip precedence 0-3 or match ip precedence

0,1,2,3

command.

NOTE: Only one of the IP precedence values must be a successful match criterion, not all of the

specied IP precedence values must match.

Related Commands class-map — identies the class map.

match mac access-group

Congure a match criterion for a class map, based on the contents of the designated MAC ACL.

Syntax

match mac access-group {mac-acl-name}

Parameters

mac-acl-name Enter a MAC ACL name. Its contents is used as the match criteria in the class map.

Defaults none

Command Modes CLASS-MAP

Supported Modes Full–Switch

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information To access this command, enter the class-map command. After the class map is identied, you can congure the

match criteria.

Related Commands class-map — identies the class map.

match mac dot1p

Congure a match criterion for a class map based on a dot1p value.