CLI Guide
match ip dscp congures the match criteria based on the DSCP value.
match ip access-group — congures a match criterion for a class map based on the contents of the designated
MAC ACL.
match mac dot1p — congures a match criterion for a class map based on a dot1p value.
match mac vlan — congures a match criterion for a class map based on VLAN ID.
service-queue — assigns a class map and QoS policy to dierent queues.
show qos class-map — views the current class map information.
clear qos statistics
Clears matched packets.
Syntax
clear qos statistics interface-name
Parameters
interface-name Enter one of the following keywords:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the M I/O Aggregator.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information When you issue this command, statistical information stored regarding QoS clears and resets to 0. You can access
these statistics using the show qos statistics command in EXEC mode. When the trac pattern matches
the QoS classication criteria ows, the corresponding counters increment.
Related Commands
show qos statistics — displays the QoS statistics.
crypto key zeroize rsa
Removes the generated RSA host keys and zeroize the key storage location.
Syntax
crypto key zeroize rsa
Defaults none
1056 Quality of Service (QoS)